5 Causes of Bearing Noise

Bearing  Noise Specific Causes
Manufacturing Defects Damaged rolling elements or raceways
Foreign particles in grease
Contamination Contamination Corrosive agents  entering the bearing
Housing - out of round, undersized
Failure to clean mounting surfaces
Rotating shields or seals rubbing  stationary parts
Mounting Conditions Improper shaft or housing fits
Bearing raceway or rolling elements  damaged during mounting
Mounting Conditions
Bearing cocked during mounting
Housing pounded out by bearing
Unbalanced load
Application Related Harmonic frequency of bearing  components
Cage noise or vibration - steel vs  plastic retainer
Application Related Vibration of  bearing while stationary
Noise characteristics of grease
Lubrication Related Inadequate grease level
Impurities in grease Lubrication  Related
Wrong grease


Click sound happens more frequently in big bearings under radial loads. It is produced at low speeds and takes place when the rolling aspects and the cage/inner ring clash. Using a preload is an efficient countermeasure to click sound.
A screech sound can be loud, and it seems like metal moving on metal. Contrary to expectations, this does not show an issue. Screech sound tends to accompany fairly big bearings utilized under a radial load. The friction in between the external ring and rolling aspects is thought about to be the reason for screech sound. Lowering the radial clearance and using a really shallow groove in the external ring raceway can be efficient countermeasures.
Cage noises been available in 2 types: a sound suggestive of the cage hitting the rolling aspects ("kacha-kacha") and a low-frequency sound ("gaga-gaga") triggered by the friction in between the cage guide face and the bearing part that guides the cage. The very first can be lowered by minimizing the installing mistake. The 2nd sound, regularly bothersome due to its decibel level, can be lowered and typically removed by picking an unique cage developed to decrease this sound and using the proper lube.
Rolling component passage vibration happens in rolling bearings running under a radial load. "Goro goro" is the very best descriptor of this sound. Decrease of radial clearance or application of a preload can be reliable countermeasures.
Vibration and sound associated to bearing production can not be gotten rid of totally. It is intrinsic to the bearing producer and is typically brought on by waviness of the inner or external ring or the rolling component.
Defect sound is triggered by a defect such as rust or when a damage exists on ended up raceway surface area or rolling bearing. It triggers a pulsating, machine-gun like sound. The sound takes place at periods, typically proportional to the speed of the bearing. It can be lowered with the application of high viscosity grease, however generally this sound suggests that the bearing needs to be changed.
Contamination sound takes place when a foreign particle makes its method into a bearing. A "chi chi chi" sound, the sound is brought on by the foreign particle being captured in between the rolling aspects and the raceway surface areas. Damage can take place, and is more serious in smaller sized bearings. The very best countermeasure is avoidance-- constantly manage a bearing securely and decrease outdoors contamination.
Race sound is one of the most fundamental noise in rolling bearings; this happens when the raceway and rolling components call each other. It is smooth and constant. The faster the running speed, the louder the noise and if the radial clearance is minimized the noise likewise ends up being louder. The greater the viscosity of lubrication, the lower the noise, and if the greater the real estate rigidness, the lower the magnitude of the noise. Removing this sound completely is not possible, however it can be decreased by enhancing the quality of the bearings.



Contact us